The AimCam hard case allows you to easily store your AimCam and all supporting accessories in a single easy carry case. The foam base has been specifically designed to stop your AimCam camera from moving when in storage, this means once you calibrate your AimCam camera it should stay set for a longer period of time. The foam insert also has a cutout section for your prescription mount and for the AimCam reloaded powerpack allowing you can charge your AimCam on the move. There is enough pocket storage at the back of the case for your lenses and all other accessories.
+ My AimCam does not show up when connected to my PC?
Please turn your AimCam off before connecting it to your PC. If you still can not locate your AimCam please press the reset button. To locate your reset button please watch the video below.
Yes. Please be aware this operation has to be performed with a micro SD card in your AimCam. This operation will also format the SD card deleting all media currently store on the SD card. Before you perform this operation please safely store all the videos you wish to save on your PC, laptop or mobile device.
To reset the password. Firstly, switch the AimCam to standby, then press and hold down the two buttons at the same time for about 10 seconds until the standby & WIFI light flashes. This has reset the password to default “12345678”.
+ Can the AimCam camera be mounted on my existing pair of glasses?
No. The AimCam glasses frame holds all the needed electronics to operate your AimCam such as PCB, battery, microphone and WIFI transmitter.
+What’s the difference between AimCam and other sports action Cameras?
AimCam is the only sports action camera that has been designed from the ground up to capture line of sight. The AimCam Pro 2 has a directional 8 mega Pixel microcamera that can be mounted directly above the user’s dominant eye. This can then be adjusted to compensate for any tilt or angle of the users head when aiming. Other mounted cameras only point in a single direction, only AimCam points where your eye is looking.
+Is AimCam only for aiming sports?
No, AimCam is a fully adjustable camera system which can be manipulated to record/live stream any new adventure, your way.
+Do you need the lenses in the glasses when wearing AimCam?
No, the Frames of the AimCam glasses are ridged and the camera system can function perfectly without the lenses in. However, all of our lenses are certified safety lenses!
+Does AimCam work for either left or right eye dominance?
Yes. AimCam comes with a range of clips suitable for positioning the micro-camera above either the left or right eye.
+How long does the AimCam battery last?
If you want to use the AimCam as a training aid and Wirelessly live stream to an instructors tablet or phone then the battery will need to be recharged after approximately 1 to 1.5 hours of use. If you turn off Wi-Fi and just record then the internal battery can record, for up to 1.5 to 2 hour before you need to recharge or switch to external battery power. AimCam is capable of working while being charged at the same time. Connect to a USB Powerbank with the included micro USB cable to give your AimCam an unlimited battery life.
+How Long will my AimCam record for on a 32GB SD Card?
Recording time will vary according to the resolution setting used and the card capacity. Here are the average recording storage times for your AimCam camera with a 32GB SD card:
1080p Full HD (30 fps): 4h 20m
720p (60 fps): 4h 20
We recommend the classification of the SD card to be (Class 10 or above). Reduce the record times above to half for a 16GB memory cards.
+Can I just live stream my view/line of sight without having to record?
Yes, you don’t even need an SD card in your AimCam! Just switch on, Hit the WiFi button and you’re live streaming, it’s as easy as that straight out the box!
+What is [WDR] within the app?
Wide dynamic range adjusts automatically to bright and dark areas to adjust for and help eliminate overexposure and underexposure conditions. It helps improve the overall exposure of the image and sets the camera to pick up more detail in dark areas. The settings for WDR can be controlled using the built-in OSD (on-screen display) menu in the AimCam App. [WDR] Icon 'white' is - OFF / Icon' blue' is - ON.
If you need further support please do not hesitate to drop us a message via the form below